Junsi iCharger X12

Description

Junsi iCharger X12

Junsi X12 Charger delivers 1100W and 30A in a compact DC charger. Moreover, it targets racers who want fast, repeatable battery results. Additionally, its small footprint fits tight pit tables and travel cases.

First, you get advanced features that many larger chargers reserve for premium models. Next, you can tune settings for different packs and classes. Therefore, you spend less time guessing and more time racing.

High power, wide battery support

Notably, the X12 supports up to 12s packs across many chemistries. For example, you can charge LiPo, LiIo, LiFe, LiHV, LTO, and NiZn packs. Consequently, one charger can cover several RC platforms and seasons.

• Charge output: up to 1100W and 30A
• Balance current: up to 2A for accurate cell matching
• Balance math: corrects for internal resistance differences

Cooling and temperature safeguards

Also, the internal temperature sensor guides intelligent fan control. As a result, the fan ramps only when needed and stays quieter at low load. Furthermore, stable cooling helps keep charge rates consistent across long practice days.

• Fan control: adjusts speed based on internal temperature
• Thermal limiting: reduces output power when temps climb
• Shutdown protection: turns off beyond the shutdown threshold

Display, profiles, and data tools

In addition, the 2.4 inch IPS LCD shows key numbers at a glance. Specifically, it displays current, voltage, power, capacity, internal resistance, status, time, and temperature. Meanwhile, you can save up to 32 profiles for quick swaps between packs.

• Profiles: store up to 32 parameter settings
• SD card: import and export data for easy record keeping
• Software: use Junsi Console for plotting and analysis

Additionally, if you want background detail on battery chemistry, review lithium polymer battery charging basics. Therefore, you can match charge choices to pack type and racing goals.

Discharge modes and health checks

Junsi X12 Charger also offers multiple discharge options for tuning and storage prep. For example, you can run self-discharge or regenerative discharge back to the input. Moreover, extra discharge modes help when you need deeper conditioning workflows.

• Discharge modes: self-discharge, regenerative to input, and lithium extra expanding discharge
• IR measurement: check pack IR and each cell IR, online or offline

Protection and upgrade paths

Finally, the X12 adds protection against reverse polarity on input or output. Additionally, it monitors input voltage and current to help prevent setup mistakes. Then, you can update firmware using USB or an SD card to keep features current.

Junsi X12 specifications

• Input voltage range: 11-53VDC
• Maximum input current limit: <35A
• Maximum charge/discharge current: 30A
• Digital power supply output: 50V/30A
• Maximum charge power: 1100W
• Built-in discharge power: 50W
• Maximum regenerative discharge power: 1100W
• Maximum extra discharge power: 1500W@50V/40A
• Maximum current drain for balancing: >2.0A
• Display: 2.4 inch IPS LCD (320×240)
• Net weight: 230g
• Dimensions: 112 x 64 x 37 ± 0.5 mm

View more Junsi iCharger products here.