ToolkitRC ADP450

Description

ToolkitRC ADP450

ADP450 Power Supply gives your DC charger the input power it needs. Moreover, it removes the weak power brick that limits real output. As a result, your charger can hit its rated watts with less drama. Notably, ToolkitRC built the ADP450 for modern high-watt portable chargers.

Portable dual-channel chargers look powerful on paper. However, many setups choke when the input supply cannot keep up. Therefore, you see slow charge rates, voltage sag, or random cutoffs. With 450W on tap, you keep performance consistent across packs.

Why the ADP450 matters on the bench

No more power bottlenecks: Many chargers claim big numbers. Yet, they only reach those numbers with a strong DC source. Consequently, the ADP450 helps you fast-charge larger 6S packs without starving the charger. Additionally, you can run two channels with more confidence.

Plug-and-play XT60 output: Forget soldering adapters for a clean station. Also, skip flimsy alligator clips that slip mid-session. Instead, the ADP450 includes a native XT60 output port for direct connection. As a result, your work area stays tidy and reliable.

Efficient power with smart cooling: The unit uses Active Power Factor Correction (PFC). Therefore, it wastes less energy as heat during long charge cycles. Moreover, the internal fan ramps up when temperatures rise. Consequently, you get steadier operation during heavy loads.

Specifications and key numbers

First, check the basics below before you pair it with your charger. Next, match voltage and connector needs for your pit setup. Finally, plan your layout using the compact size.

• Input Voltage: AC 100V – 240V (worldwide compatibility)
• Output Power: 24V DC / 19A / 450W
• Dimensions: 2.2″ (57mm) x 3.6″ (91.5mm) x 7.4″ (187.4mm)

Perfect pairing with 24V DC chargers

The ADP450 outputs a fixed 24V, which many racers treat as a sweet spot. Accordingly, it pairs well with high-performance DC chargers that thrive on stable 24V input. For example, you can match it with ToolkitRC chargers like the M8D, M6D, and M9. In addition, you can read more about switching power supply design and regulation to understand why stable input matters.

• M8D (Dual Channel Touch)
• M6D (Dual Channel Compact)
• M9 (Multifunction Tool)

What you get in the box

You can set up quickly with the included parts. Moreover, ToolkitRC includes the cable you need for a simple XT60-to-charger connection. Therefore, you spend less time building adapters and more time charging.

• ToolkitRC ADP450 Power Supply Unit
• Regional AC Power Cord (US, EU, UK, or AU)
• XT60 Female-to-Female Output Cable