iCharger Temperature Sensor for LiPo Battery

Description

iCharger Temperature Sensor for LiPo Battery

iCharger Temperature Sensor support starts with accurate pack heat tracking on every run. Moreover, this flat probe sits flush on LiPo or LiHV packs for reliable readings during charge and discharge.

Therefore, you can spot rising temps early and adjust your routine fast. In addition, you gain peace of mind when you push Stock or Modified power.

Why temperature tracking matters

First, heat often signals stress inside a battery pack. Consequently, monitoring temperature helps you avoid unsafe charge rates and aggressive discharge loads.

For example, you can set charger limits and stop a cycle before temps climb too far. Similarly, you can compare packs and catch a weak cell group sooner.

Notably, better control reduces the risk of thermal runaway and swelling. As a result, your packs can deliver more consistent punch and longer service life.

Specifications

• Input connector: Male 3-pin JST-XH or Futaba connector
• Wire type: 22 AWG silicone
• Length: 20 or 36 inches

Key features

• Flat sensor design: Delivers solid contact on LiPo or LiHV cases.
• Versatile use: Works well for both charging and discharging checks.
• Enhanced safety: Helps you confirm temps stay in a safe range.
• Durable build: Uses quality materials for repeated pit use.

Charger compatibility

Next, choose the connector version that matches your iCharger port. Then, plug it in and route the wire away from fans and belts.

• JST-XH version: Compatible with 308DUO, 406DUO, and 4010DUO.
• Futaba connector version: Compatible with 456DUO, 458DUO, 4512DUO, S6, X6, X8, X12, DX6, DX8 and DX12.

Setup tips for better readings

First, place the flat probe on the broad side of the pack. Additionally, secure it with a small strip of tape or a strap.

Meanwhile, keep the probe away from heat sinks and motor wires. Consequently, you avoid false spikes that can confuse your limits.

Finally, log your temps after each run and compare results over time. Therefore, you can tune gearing, timing, and charge rates with confidence.

Safety note and related products

In fact, a sensor works best when you pair it with good LiPo handling habits. For more background, review lithium polymer battery safety basics before you race.

*All batteries shown serve as reference only. The battery does not come with the iCharger Temperature Sensor for LiPo Battery.

View more Regenerative Discharger products here.