2S 30A Charge Cable (XT90 & Deans) with Temperature Sensor

Description

2S 30A Charge Cable (XT90 & Deans) with Temperature Sensor

RC charge cable performance matters most when you push 2S LiPo packs hard. Therefore, the RC Discharger 2S 30A Charge Cable adds live temperature feedback during charging. Moreover, you gain a cleaner pit setup and a more stable connection. As a result, you can focus on laps, not heat risk.

First, this cable pairs an XT90 on the charger side with a Deans-style plug on the pack side. Next, the integrated temperature sensor reports pack temperature to your charger. Consequently, you can spot heat spikes early and react fast.

RC Discharger 2S 30A Charge Cable

XT90 to Deans | Integrated Temperature Sensor

Innovation meets safety. In addition, the RC Discharger 2S 30A Charge Cable includes an Integrated Temperature Sensor built into the lead. Therefore, your charger can track battery vitals in real time while you charge. Ultimately, that extra data helps protect your 2S LiPo and LiHV packs.

Why It’s a Must-Have for Your Pit Table:

• Integrated Thermal Monitoring: First, stay ahead of battery fatigue with live temperature readings. Consequently, you can reduce overheating risk during fast charge sessions.
• 30A Current Rating: Additionally, the 30 Amp capacity supports faster charge rates with less bottleneck. As a result, you spend less time waiting at the charger.
• Premium 10AWG Wire: Moreover, high-strand 10AWG silicone wire helps reduce resistance and voltage drop. Therefore, your charger output reaches the pack more efficiently.
• Pro-Level High-End Soldering: Also, strong solder work improves durability through a long race season. Consequently, the connection stays reliable after repeated plug cycles.
• Secure XT90 & Deans Connectivity: Notably, XT90 offers a rugged charger-side interface, while Deans stays compact on the pack side. Thus, you get a rock-solid fit with less wiggle.
• Extended 32-Inch Reach: Finally, the 32-inch lead helps you route cables neatly across the bench. As a result, your pit area stays organized and safe.

Performance Specs at a Glance

• Application: Specifically optimized for 2S LiPo / LiHV battery packs.
• Max Current: Rated for up to 30 Amps.
• Wire Gauge: Premium 10AWG high-flex silicone.
• Safety: Built-in Temperature Probe for charger monitoring.
• Connectors: XT90 (Charger side) / Deans (Battery side).
• Length: 32 Inches (80cm).

How to use it for consistent results

First, confirm your charger supports an external temperature probe input. Then, place the sensor contact firmly so it reads pack temperature, not air temperature. Additionally, set a conservative temp cutoff in your charger menu. For background, review safe lithium polymer battery charging basics before race day.

Next, inspect connectors before each session and keep them clean. Moreover, avoid sharp bends near solder joints to reduce strain. Consequently, your RC charge cable will deliver steadier power and fewer surprises.

Support Your Passion

When you use RC Discharger equipment, you choose hardware built for racers who value safety and repeatability. In addition, this lead helps protect packs that cost real money to replace. Ultimately, you get a pit tool that supports a serious race program.