ToolkitRC M8D

Description

ToolkitRC M8D

ToolkitRC M8D Charger brings fast, precise dual-channel charging to any serious RC bench. Moreover, you get up to 1600W output, dual 1-8S channels, and a 3.5″ flip touchscreen.

Touch the Power. Control the Charge. 1600W Output | Dual 1-8S Channels | 3.5″ Flip Touchscreen

First, meet the ToolkitRC M8D and streamline your charging routine. Additionally, the flip screen and new UI help you change settings quickly. Therefore, you spend less time in menus and more time driving.

Massive Flip Screen for Clear Viewing

Don’t squint at your charger during a busy race day. Instead, the 3.5″ IPS touchscreen (320×480) flips for a better angle. Consequently, you can read cell data while standing or sitting.

New Touch UI for Faster Setup

Next, the touch-first interface keeps common actions close at hand. For example, you can check voltages, set charge rates, and confirm balance status in seconds. Furthermore, the layout feels natural when you work quickly.

Dual-Channel Power, Two Ways

Why wait between packs when practice runs stack up? Instead, charge two batteries at once with independent 8S outputs. Also, you can combine channels when you need maximum power.

• Asynchronous Mode: Charge two distinct packs at up to 800W each (30A).
• Synchronous Mode: Combine channels to push 1600W (50A) into one large pack.

Battery Destruction Mode for Safer Disposal

Safety matters, especially with damaged packs. Therefore, the dedicated Battery Destruction Function discharges batteries down to 0V for disposal. In addition, this step helps reduce risk during transport and storage.

Smart Thermal Control Under Load

Heat can slow you down during high-power sessions. However, dual fans adjust speed based on temperature and load. As a result, you get efficient cooling with less noise.

65W USB-C Power for Pit Gear

Meanwhile, the USB-C output powers your other devices. Specifically, it delivers up to 65W for laptops, tablets, or phones. Consequently, your whole pit setup stays ready between rounds.

Maximize Your Setup: New Accessories

Additionally, accessories help you build a cleaner and faster charging station. For example, a stand improves screen viewing and airflow. Likewise, a regenerative discharger supports high-rate cycling without extra heat.

Folding Charger Stand for M8D

First, upgrade your bench with the dedicated Folding Charger Stand. Moreover, it holds the charger securely and improves cooling airflow. Therefore, you get a better viewing angle on the flip screen.

• Compact Design: Folds flat for easy transport in your field bag.
• Ergonomic: Places the screen at an ideal height for quick taps.

Regenerative Dischargers for Battery Cycling

Next, pair the charger with external regenerative dischargers to use the 800W recycle discharge mode. Consequently, you can cycle packs at high amperage while keeping heat away from the charger. In fact, many racers use cycling to maintain consistency across runs.

• Regenerative Discharger 2S: Cycle a single 2S battery or two 1S batteries (or 1/28). Notably, it suits 1/10 Touring Car pack management.
• Regenerative Discharger 4S: Cycle two 2S batteries at once or one 4S battery. As a result, you cut maintenance time significantly.

Technical Specifications

Before you wire your bench, confirm input power and pack support. Additionally, note that lithium battery care depends on correct settings and safe handling. For a quick refresher, review lithium polymer battery safety basics.

Power & Input

• Input Voltage: DC 10.0-49.0V @ MAX 60A
• Charging Power (Sync): 1600W @ MAX 50A
• Charging Power (Async): 800W @ MAX 30A (x2)
• Discharge Power (Recycle): 800W @ MAX 30A (x2)
• Discharge Power (Normal): 40W @ 10A
• Balance Current: 2000mA @ 4.2V
• USB-C Output: 5.0-20.0V @ 65W

Battery Compatibility

• LiPo / LiHV / LiFe / Lion / LTO: 1-8S
• NiMh: 1-20S
• Pb (Lead Acid): 1-12S

Display & Interface

• Screen Type: IPS 3.5″ LCD (Capacitive Touch)
• Resolution: 320 x 480 pixels

Physical Dimensions

• Size: 130mm x 97mm x 42mm
• Weight: 450g

What’s in the Box

• 1x ToolkitRC M8D Charger
• 1x USB-C Data/Power Cable
• 1x XT90 Input Cable
• 1x Screen Protector
• 1x User Manual

*Folding Stand and Regenerative Dischargers sold separately