Sanding Drum for RC Tire Break-in Machine

Description

Sanding Drum for RC Tire Break-in Machine

RC tire sanding drum upgrades your tire prep and delivers repeatable grip from the first run.

Moreover, it targets 1/10 on-road tires and 2.2″ off-road tires with a clean, even cut. Therefore, you can remove the mold line and factory shine with control. As a result, your rubber gains a flat, textured surface that bites right away.

In addition, this sanding drum pairs perfectly with our RC Tire Break-in Machine. Consequently, you spend less time guessing and more time dialing in traction for race day.

Key benefits for consistent traction

First, a uniform tread surface builds predictable side-bite and forward drive. Next, a light trueing pass removes high spots that cause chatter. Finally, a clean texture helps your additive spread evenly across the tire.

For example, many racers scuff tires by hand and end up with uneven pressure. However, a drum keeps the contact patch consistent across the full width. Consequently, you can tune grip with fewer variables.

• 1/10 on-road and 2.2″ off-road ready: Works with Touring Car, VTA, and 2.2″ off-road wheels.
• Precision sanding: Uses a quality 240 grit sanding band for fast cuts and a clean finish.
• Pro-grade build: Uses a custom 3D printed drum wheel for durability and low vibration.
• Stable operation: Adds a centering and lock-in rod to keep alignment during high RPM.
• Effortless prep: Sands evenly across the tread, so you avoid tapered edges.
• Race-ready results: Removes glaze and helps tires accept additive more consistently.

How to use it without over-sanding

First, start with short passes and light pressure. Then, check the surface often and stop once the shine disappears. Additionally, keep the drum centered so both shoulders match.

Meanwhile, choose your finish based on the track. For high bite, keep the texture fine and even. On the other hand, for dusty tracks, remove only the mold line and keep more rubber.

Notably, sanding changes the tire surface through controlled abrasion. For a simple overview of abrasion, see abrasion and surface wear basics.

What you get in the box

Additionally, each set includes the parts you need for quick setup and repeatable results.

• 2x 3D Printed Drum Wheel
• 2x 240 Grit Sanding Band
• 1x Centering and Lock-in Rod

*RC Tire Break-in Machine shown for reference only. RC Tire Break-in Machine does not come with the Sanding Drum.

Ultimately, the RC tire sanding drum helps you start each run with cleaner contact, stronger bite, and more consistent lap times.