iCharger & ToolkitRC Recommended Firmware Guide
Hey RC Discharger family! Before you plug in and start cycling your packs, there is one small but critical step to ensure your setup is dialed in for the podium.
To get the most out of your Regenerative Discharger and avoid any technical glitches, your charger needs to be running the right software. Taking 30 seconds to verify your firmware version now ensures everything works in perfect harmony when you’re in the pits!
Quick Check: How to find your version
You don’t even have to dig through menus! Just watch your charger screen the moment you power it up—the firmware version will flash on the display for a few seconds during the boot sequence.
Recommended Firmware Versions
To ensure seamless performance, we recommend the following versions:
- v2.18 for: iCharger 308DUO, 406DUO, 4010DUO
- v2.13 for: iCharger S6, X6, X8, X12
- v1.17 for: iCharger DX6, DX8, DX12, 456DUO, 458DUO, 4512DUO
- v3.11 for: ToolkitRC M8D
No Windows Computer? No Problem!
Updating an iCharger usually requires a Windows PC, which can be a hassle if you’re a Mac user or at the track without a laptop. We have the solution:
The iCharger Firmware Update Micro SD Card. We can ship you a pre-loaded Micro SD card with the latest firmware so you can update your charger directly—no computer required!
Get the SD Card or download the files here: iCharger Firmware Update Micro SD Card | RC Discharger
Keep your gear updated, your discharge rates precise, and your packs ready for the main event!