Hobbywing XERUN XR10 Stock Spec ESC (1S)

Description

Hobbywing XERUN XR10 Stock Spec ESC (1S)

Hobbywing XR10 Stock Spec gives 1S racers a tiny, light ESC for tight layouts. Specifically, this North America Edition ships with zero-timing “blinky” firmware for ROAR Spec classes. Moreover, the 23.5g footprint helps you balance a 1/12 or 1/10 1S chassis with ease.

Additionally, you gain strong throttle feel without adding weight or clutter. Therefore, you can free space for clean wiring and better airflow. Notably, that packaging advantage can improve consistency during long mains.

Key performance features for Stock Spec racing

First, zero-timing mode keeps racing fair and simple in Spec and Sportsman events. Next, the built-in boost BEC delivers up to 6A and lets you choose 6V or 7.4V for modern servos. Moreover, the ESC offers deep tuning so you can match your track grip.

• Zero-timing domination: Pre-installed “Blinky” firmware for ROAR SPEC racing.
• Built-in boost BEC: 6A max output, adjustable 6V to 7.4V for high-voltage servos.
• Precision control: 100 drag brake levels, 50 initial brake levels, plus adjustable PWM and brake frequencies.
• Wireless tech ready: Use an OTA Programmer to tune, update firmware, and review logs from a phone.
• Integrated data logger: Track max ESC and motor temps, plus peak RPM for gearing choices.
• Full protection suite: Low-voltage cutoff, thermal protection, and signal loss failsafe.

In addition, the data you log helps you spot heat spikes early. Consequently, you can adjust gearing before the motor fades. For background, you can review electronic speed control basics for RC power systems and apply the same principles to 1S setups.

Specifications at a glance

Finally, use these specs to confirm fit and class legality before race day. Also, plan your wiring length and connector choice around the compact case.

• Weight: 23.5g (without wires)
• Input voltage: 1S LiPo (3.7V)
• BEC output: 6A max (6V/7.4V adjustable)
• Programming: Separate PRG/FAN port for LCD Program Box, WiFi Module, or OTA Programmer
• Approval: ROAR approved for Spec racing

Quick setup tips for cleaner laps

First, set your BEC voltage to match your servo rating. Next, start with moderate drag brake, then add more only if the car pushes on entry. Additionally, watch logged temperatures after each run and gear down if heat climbs fast.

Meanwhile, keep wires short and secure to protect the sensor lead. Ultimately, the Hobbywing XR10 Stock Spec rewards careful tuning with repeatable power and calm braking.