2S 70A Synchronous Charge Cable (XT90 to 5mm) with Temperature Sensor

Description

2S 70A Synchronous Charge Cable (XT90 to 5mm) with Temperature Sensor

A 70A charge cable gives you faster synchronous charging with safer control. Moreover, it helps you push 2S LiPo and LiHV packs with less voltage drop. Specifically, this RC Discharger 2S 70A Synchronous Charge Cable pairs extreme power delivery with an integrated temperature sensor.

In addition, the heavy 8AWG silicone wire cuts resistance during high-amp sessions. Therefore, you get more consistent charge times and steadier pack temps. Notably, the 32-inch lead also fits complex pit layouts.

Why elite racers pick this cable

First, this lead supports true synchronous charging for 2S race packs. Next, it handles up to 70A without turning your charge station into a bottleneck. Consequently, you spend less time waiting and more time tuning.

• Extreme 70A current rating: Deliver up to 70 amps in synchronous modes for hard-charging pit programs.
• Integrated temperature sensor: Track pack heat in real time and react before temps climb.
• Heavy-duty 8AWG build: Use thick, high-strand silicone wire for low resistance and stable output.
• Synchronous charging optimized: Balance power distribution so charge cycles stay fast and even.
• Pro-level soldering: Maintain solid joints that handle vibration, heat, and daily use.
• Extended 32-inch reach: Route leads cleanly across chargers, dischargers, and pit boards.
• Premium connectors: Run an XT90 on the charger side and 5mm bullets on the battery side.

Performance specs at a glance

Also, the specs keep setup simple when you build a repeatable routine. For example, the wire gauge and connectors match high-current chargers and serious pit wiring. Meanwhile, the temperature probe adds a practical safety layer during aggressive charging.

• Application: Optimized for 2S LiPo / LiHV packs
• Max current: Up to 70A (synchronous)
• Wire gauge: 8AWG high-strand silicone
• Safety: Built-in temperature probe
• Connectors: XT90 (charger side) / 5mm bullet (battery side)
• Length: 32 inches (80cm)

How to use it safely at high amps

Before each session, inspect the bullets and XT90 for tight fit. Then, confirm your charger settings match your pack and series board plan. Additionally, watch temperature trends, since heat often signals rising resistance.

Finally, remember that higher current increases heat in connectors and cells. Therefore, many racers treat temperature as the key limit, not the amp number. For deeper background, review American Wire Gauge sizing for high-current RC wiring.

Engineered for excellence in the pits

In the pits, reliability decides mains and podiums. Accordingly, this 70A charge cable acts like a precision tool, not a basic lead. Ultimately, you get faster cycles, steadier temps, and a cleaner, more confident charge routine.