2S 45A Charge Cable (XT90 to 5mm)

Description

2S 45A Charge Cable (XT90 to 5mm)

2S 45A Charge Cable performance helps serious racers cut charge time and reduce voltage drop. Moreover, this lead removes a common bottleneck between your charger and your 2S packs. As a result, you get stronger current delivery without the heat and sag that slow you down. Notably, the XT90 to 5mm bullet layout fits many high-power pit setups.

Additionally, high-amp charging demands low resistance in every part of the chain. Therefore, quality wire, solid solder joints, and tight connectors matter as much as the charger. In fact, better leads often improve consistency across packs during long race days.

RC Discharger 2S 45A Charge Cable

High-Amp Charging | XT90 to 5mm Bullets

Maximum power delivery for serious racers. The RC Discharger 2S 45A Charge Cable is engineered to remove the bottleneck in your charging system. Built for high-performance 2S LiPo packs, this cable provides the massive current flow required to get you back on the track faster while maintaining the integrity of your batteries.

Key Product Features

• Massive 45A Current Handling: Stop limiting your charger’s potential. This cable is rated for up to 45 Amps, allowing for ultra-fast charge cycles and peak battery performance.
• Competition-Grade 10AWG Wire: Constructed with premium, high-strand 10AWG silicone wire for maximum conductivity and minimal resistance.
• Pro-Level Soldering: Every joint features high-end soldering to ensure maximum durability. This cable is built to withstand the heat of high-amp charging and the physical wear of daily track use.
• Secure XT90 & 5mm Connectivity: Equipped with a rugged XT90 on the charger side and precision 5mm bullets on the battery side for a rock-solid, low-resistance connection.
• Custom Length Options: Available in 16-inch for a clean, organized pit setup or 32-inch for extra reach and flexibility.
• Built for Durability: From the high-quality silicone insulation to the reinforced connectors, this cable is designed to survive tough racing conditions and frequent pit-lane use.

Performance Overview

• Application: Optimized for 2S LiPo / LiHV battery packs.
• Capacity: Rated for high-current loads up to 45 Amps.
• Wiring: Ultra-flexible 10AWG silicone wire.
• Connectors: XT90 (Charger) / 5mm Bullet (Battery).
• Fitment: Perfect for high-power chargers like the Junsi iCharger series.

Elevate Your Pit Setup

Precision charging is the backbone of RC racing. By choosing RC Discharger, you are investing in a brand trusted by professionals for its commitment to quality and efficiency. Don’t settle for standard leads when you can power your passion with the best in the business.

How to choose the right lead

First, match the connector style to your charger and packs. Next, pick a length that keeps your pit area neat and safe. For example, a shorter lead can reduce clutter and resistance. However, a longer lead can help when your charger sits away from your battery tray.

Additionally, confirm your charging goals before you push current. Therefore, check your pack rating, your charger limits, and your balance lead condition. In particular, keep connectors clean and fully seated before each charge.

Safety and consistency tips

Moreover, high current creates heat fast, so monitor connector temperature during early runs. Consequently, you can spot a loose bullet or worn XT90 before it costs a pack. Also, store and route leads to avoid sharp bends near solder joints.

Finally, understand why low resistance matters during fast charging. For a clear overview, review electrical resistance and conductance basics and apply them to your pit wiring. Ultimately, the 2S 45A Charge Cable helps you charge harder while keeping your setup dependable.