2S 40A Charge Cable (4mm to 5mm) with Temperature Sensor

Description

2S 40A Charge Cable (4mm to 5mm) with Temperature Sensor

RC charge cable performance matters most when you push 2S packs hard at the track. Therefore, the RC Discharger 2S 40A Charge Cable combines high current flow with an integrated temperature sensor. Moreover, it fits chargers that use 4mm output ports and batteries that use 5mm bullets. As a result, you get real-time pack temperature feedback while you charge.

In addition, this setup helps you spot heat spikes early and adjust your charge plan fast. Consequently, you protect cells, reduce risk, and keep your packs consistent. Finally, you simplify your pit routine because the sensor stays in the same place every time.

RC Discharger 2S 40A Charge Cable

4mm to 5mm | Integrated Temperature Sensor

The industry’s first integrated thermal solution. Specifically, the RC Discharger 2S 40A Charge Cable delivers high power and an Integrated Temperature Sensor. Additionally, the built-in probe sends live thermal data to your charger for safer charging decisions. Therefore, you can charge 2S LiPo or LiHV packs with more precision and control.

Why it belongs on your pit table

• Integrated Temperature Sensor: First, monitor pack heat in real time and avoid unsafe temperature rise.
• High-current 40A rating: Next, support up to 40 Amps for faster charge cycles and less voltage sag.
• Premium 10AWG construction: Additionally, ultra-low resistance 10AWG silicone wire keeps power delivery stable.
• Pro-level soldering: Moreover, hand-finished joints handle repeated use and rough race-day handling.
• Universal 4mm to 5mm connectivity: Consequently, heavy-duty 4mm bullets fit the charger side while precise 5mm bullets fit the battery side.
• Extended 32-inch reach: Finally, the 32-inch length supports cleaner routing on crowded benches.

Performance specs at a glance

• Application: Specifically optimized for 2S LiPo / LiHV packs.
• Max current: Rated for up to 40 Amps.
• Wire gauge: Premium 10AWG high-strand silicone.
• Safety: Built-in Temperature Probe for live monitoring.
• Connectors: 4mm bullet (charger side) / 5mm bullet (battery side).
• Length: 32 inches (80cm).

How to use it for consistent results

First, plug the 4mm bullets into your charger outputs and confirm polarity. Then, connect the 5mm bullets to your 2S pack leads for a firm, low-resistance fit. Next, place the temperature probe on the pack where it reads heat reliably. Moreover, set a sensible temperature cutoff on your charger when that option exists.

Additionally, keep connectors clean and tight because resistance creates heat. Therefore, inspect bullets for discoloration or looseness after hard weekends. For a deeper overview of why heat matters, review lithium polymer battery safety and charging basics before you push higher charge rates.

Support your passion

RC Discharger products come from racers who value speed and safety together. Accordingly, this RC charge cable upgrade helps protect your batteries while you chase faster turnaround times. Ultimately, you invest in pro-grade gear that supports a cleaner, more confident race program.