1S 45A Charge Cable (XT90 & 5mm) with Temperature Sensor

Description

1S 45A Charge Cable (XT90 & 5mm) with Temperature Sensor

1S 45A Charge Cable gives 1S racers faster charging and tighter safety control. Specifically, the built-in temperature sensor helps you spot heat rise early. As a result, you protect expensive 1S LiPo and LiHV packs during hard charge sessions. Moreover, the heavy-gauge wire keeps voltage drop low for clean power delivery.

First, this cable targets serious pan car and 1/12 scale programs. Next, it feeds real-time temperature data to your charger during the entire cycle. Therefore, you can push performance while staying disciplined about pack health.

RC Discharger 1S 45A Charge Cable

In particular, the integrated temperature sensor turns your charge lead into an active safety tool. Additionally, the 45A current rating supports aggressive charge plans with less stress. Consequently, you spend less time waiting and more time running laps.

Why It’s a Must-Have for Your 1S Setup:

• Integrated Thermal Monitoring: Protect your 1S packs with live temperature feedback. Therefore, you can stop a charge before heat damages cells.
• High-Current 45A Capacity: Handle high charge rates with confidence. As a result, you cut downtime between rounds.
• Pro-Grade 10AWG Wiring: Use ultra-low resistance 10AWG silicone wire for accurate charger readings. Moreover, you keep power transfer stable under load.
• Elite Build Quality: Rely on durable materials and strong solder work for long seasons. Additionally, the cable stays dependable through repeated pit use.
• Secure Connectivity: Run an XT90 on the charger side and 5mm bullets on the battery side. Consequently, you get a tight, low-resistance connection every time.
• Flexible Reach: Choose 16-inch or 32-inch lengths. Then, you can fit any pit table or charging layout.

Performance Specs at a Glance

• Battery Type: Optimized for 1S LiPo/LiHV packs.
• Max Current: Up to 45 amps.
• Wire: Premium 10AWG high-strand silicone.
• Safety: Built-in temperature probe for charger monitoring.
• Connectors: XT90 (charger side) / 5mm bullet (battery side).

How to Use It for Consistent Results

First, confirm your charger supports an external temperature probe input. Next, place the sensor firmly against the pack surface and secure it. Then, set a conservative temperature cutoff based on your pack maker guidance. For a deeper overview of lithium polymer chemistry, review lithium polymer battery safety basics before you push higher charge rates.

Finally, log temps after each run and adjust charge rate as needed. Accordingly, you build repeatable pack behavior across practice and mains. In the end, this 1S 45A Charge Cable helps you charge with speed, control, and confidence.

Power Your Passion

When you use RC Discharger cables, you use gear racers trust at the track. Moreover, this lead does more than move current, because it helps you manage heat. Ultimately, you show up for the next main event with safer packs and steadier power.